PRINTED DESKTOP ROBOT ARM ON A TURNTABLE BASE / ESP32 APPLICATION
Desktop Robot Arm
A compact, 3D-printed desktop robot arm built around an ESP32-C3 Mini and four SG90 servo motors.
Hardware
Boards: ESP32-C3
Supported hardware: ESP32-C3. Confirm the exact board revision and pin map in the upstream repository.
What the source supports
Upstream evidence: Reviewed from public README media at commit f797ef3463e2 under MIT. Firmware was not executed.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: cancast
Screenshots decoded from the upstream README at a pinned commit. Repository code and firmware were not executed; the license texts are included in the preview package.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
Clawd Mochi Plus Clawd Mochi Plus E-Paper Climate Display ESP32 C3 Lcd1602 Pixel Clock HU 058 Wi Fi Clock LoRa Home Control
See what an ESP32 project looks like, and whether it runs on your board.
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Try a project
Newest listings
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.