PROJECT / ESP32 APPLICATION
Glideslope
An LED flight board for the planes landing over your house: live ADS-B landings, go-arounds, take-offs, a map, arrivals and weather on a 128x64 HUB75 panel (ESP32-S3).
About this project
A 128×64 HUB75 panel on the wall plays out the traffic landing over your house: an arrival flies across, tracks the glide path down and touches down with tyre smoke, while departures, go-arounds and emergency squawks get scenes of their own. Positions come from public ADS-B community feeds; Heathrow works out of the box and airport packs can be installed from the web page. Between aircraft it rotates through a map, arrivals board, weather, daily stats, holding stacks and a route globe. The tested controller is a Huidu HD-WF2 with a 5 V supply, since the board's USB-A port does not power the panel. Airline logos are trademarks and must be supplied separately as PNGs converted to 32×32.
Open project preview ↗Hardware
Boards: ESP32-S3
Supported hardware: ESP32-S3. Confirm the exact board revision and pin map in the upstream repository.
What the source supports
Upstream evidence: Reviewed from public README media at commit a5f603b21413 under Apache-2.0. Firmware was not executed.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: SamHoughton
Screenshots decoded from the upstream README at a pinned commit. Repository code and firmware were not executed; the license texts are included in the preview package.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
Espresso Shot Timer Chroma WOTD Dotmic Espressolog Espunix Flightwall Matrixportal
Explore projects
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Today's picks
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.