ESP32 Gallery

TWO-PLAYER PIXEL RACER / ESP32 APPLICATION

Pocket Rally

Two-player ESP-NOW pixel racer for Guition JC2432W328C ESP32 touch displays

Pocket Rally
Open project preview ↗
About this project

About this project

Two Guition JC2432W328C touch boards run the same firmware and pair directly over ESP-NOW on channel 6, no router involved: one becomes host and owns physics, collisions, turbo timers and lap counting, the other predicts locally and sends steering every 16 ms. A race is three laps of covering 192 short ribbon sections; turbo gives a two-second burst and five seconds of recharge, and pickups raise top speed by 12% up to three times. A full image flashes at 0x0 with esptool. The hardware has not been physically tested in the development environment, so display colours, touch mapping and latency still need checking on real boards.

From the README

From the README

Display
Display | ST7789, portrait 240×320
Feature
192 short ribbon sections
Feature
then wait 5 seconds for it to recharge
Limit
The hardware has not been physically tested in this development environment.

Hardware

Native board: Guition JC2432W328C

Boards: ESP32

Supported hardware: ESP32. Confirm the exact board revision and pin map in the upstream repository.

What the source supports

Upstream evidence: Reviewed from public README media at commit cb36c7ab33dc under MIT. Firmware was not executed.

Media credit & rights

Upstream project media · rights remain with its owner · Credit: LeonFedotov

Screenshots decoded from the upstream README at a pinned commit. Repository code and firmware were not executed; the license texts are included in the preview package.

View original source ↗ Copyright & removal · Reviewed

More projects on these boards

Mobiflight 737 Annunciators Cydintosh ESP32 Wake On Lan Remote Pixelix Speeduino Serial Sim AIDlink

Source repository ↗

Browse all projects

See what an ESP32 project looks like, and whether it runs on your board.

Sort

FILTERS

Browse by form factor. Check the exact board, chip and peripherals before installing.

MADE SOMETHING?

Give your project a little spotlight.

Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.

Try it

Project source ↗
Build & safety

Open project page ↗
FROM YOUR WORKBENCH

Small board.
Big idea.

Share what you've made.

Automatic checks start now. Most reviews finish in 1–3 days.

Prefer GitHub? Open an issue ↗