WALL-MOUNTED HOME SCREEN / ESP32 APPLICATION
Tab5 Home Screen
Weather, climate and home controls on a personal wall screen.
About this project
About this project
Everything fits on one 1280×720 page: rain for the next hour, a 15-day forecast, climate, lights, shutters, plant sensors, cameras, music and a Samsung TV remote. It is built with ESPHome and LVGL, and Home Assistant pushes only what changed, so the tablet never polls and a still screen barely redraws. The wake word is detected on the device and audio leaves only afterwards. Twenty-one light or dark themes switch without a restart, and rooms and devices are ticked in a Home Assistant blueprint, so changing a device needs no reflash. The code was written end to end by AI, documented in 68 architecture decision records, with eight experimental offline games keeping clock, alarm and arcade usable when Home Assistant is down.
From the README
From the README
- Display
- A single page (1280×720 on the Tab5, 1024×600 on the Waveshare 7B)
- Feature
- Twenty-one themes, light or dark.
- Build
- to build your own, ESPHome ≥ 2026.9.0
Hardware
Native board: M5Stack Tab5
Boards: M5Stack Tab5 (ESP32-P4)
M5Stack Tab5 with ESPHome and LVGL; Home Assistant supplies device state. Display revision compatibility varies.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: Axellum
Screenshots from the upstream README. Code and firmware were not executed. License notices are included.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
Matrix Rain Tab5 ESP32 Mac II Esp32emu Pixel Tower Defense
Same use case
See what an ESP32 project looks like, and whether it runs on your board.
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Try a project
Newest listings
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.