ESP32 Gallery

RLCD READER FOR T5 / ESP32 APPLICATION

Reflbo T5

reflbo firmware on the LilyGo T5-ePaper-S3, beside the Waveshare ESP32-S3-RLCD-4.2 (fork of Vybo/reflbo)

Reflbo T5
Open project preview ↗
About this project

About this project

A reflective desk display that never really turns off, running off a single 18650 cell. Between updates it sleeps, waking once a minute for a redraw of about sixty milliseconds and opening Wi-Fi once a day for a sync lasting three to four seconds. The 400×300 one-bit reflective panel is read by ambient light, so idle draw stays tiny. Nine layouts and up to sixteen presets cover indoor climate, weather and air quality, rain in the next two hours, a ČHMÚ rain radar, aircraft overhead, a solar forecast and the house's energy flow. Two buttons, KEY and BOOT, drive a menu; setup happens on a phone through the device's own QR-coded hotspot, and layouts can be split down to status-bar-sized cells.

From the README

From the README

Display
ST7305 reflective LCD (400×300, 1-bit)
Power
roughly 9 days on a 3400 mAh cell
Feature
Nine layouts and up to 16 presets
Limit
draws about 60 mW whatever the firmware does

Hardware

Native board: Waveshare ESP32-S3-RLCD-4.2

Boards: ESP32-S3

Supported hardware: ESP32-S3. Confirm the exact board revision and pin map in the upstream repository.

What the source supports

Upstream evidence: Reviewed from public README media at commit b7d0fb556990 under Apache-2.0. Firmware was not executed.

Media credit & rights

Upstream project media · rights remain with its owner · Credit: Vybo

Screenshots decoded from the upstream README at a pinned commit. Repository code and firmware were not executed; the license texts are included in the preview package.

View original source ↗ Copyright & removal · Reviewed

More projects on these boards

Vocab Card · Paper Screen reflbo Bus 404 Found Claudescreen Codex Proxy Rs ESP32 Monitor ESP32 DATV RX

Source repository ↗

Browse all projects

See what an ESP32 project looks like, and whether it runs on your board.

Sort

FILTERS

Browse by form factor. Check the exact board, chip and peripherals before installing.

MADE SOMETHING?

Give your project a little spotlight.

Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.

Try it

Project source ↗
Build & safety

Open project page ↗
FROM YOUR WORKBENCH

Small board.
Big idea.

Share what you've made.

Automatic checks start now. Most reviews finish in 1–3 days.

Prefer GitHub? Open an issue ↗