AI AGENT DESK DISPLAY / ESP32 APPLICATION
ManAgents
USB desk display showing what your AI coding agents (Claude Code, OpenCode) are doing — ESP32 firmware, Go helper, 3D-printable 45° enclosure
About this project
About this project
One card per open Claude Code, OpenCode or Codex session, on a 4-inch screen standing on the desk: green while an agent works, yellow when it waits for you, red when it failed, dark after hours of idling. The board is an LCDWiki 4.0" ESP32-32E sold as E32R40T, and both the firmware and the 3D-printed stand are made for that model. A helper program installs on a Mac or Linux machine, starts at login and exchanges only status over USB — no code leaves the computer. Flashing a new board takes one command and about 13 seconds. The stand needs two printed parts, four ST2.9 x 9.5 self-tapping screws and rubber feet.
From the README
From the README
- Enclosure
- 4 self-tapping screws ST2.9 x 9.5
Hardware
Native board: E32R40T
Boards: ESP32
ESP32-class board. Verify the exact board revision, display, power source and wiring in the upstream build guide.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: tonylook
Screenshots from the upstream README. Code and firmware were not executed. License notices are included.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
AgentScreen AI Quota Monitor Bb Talkie Zongzhu Bot 2D LED Matrix A Ball Robot Based On ESP32
See what an ESP32 project looks like, and whether it runs on your board.
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Try a project
Newest listings
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.