WIFI SERIAL BRIDGE FOR GRBL LASER ENGRAVERS / ESP32 APPLICATION
GRBL Wireless Bridge
WIFI串口网桥。星光4改无线，无线激光雕刻机可用，低成本$3。Make GRBL run on wifi with an ESP32, with auto discovery and compatible with all existing applications.
About this project
About this project
A laser engraver or other serial-controlled machine gets a Wi-Fi replacement for its cable: MicroPython on an ESP32 opens a TCP socket and shuttles bytes to a UART, and a desktop Python script either points an application straight at that socket, as LaserGRBL accepts, or maps it onto a virtual COM pair through com0com. Settings are two text files uploaded to the board, one for SSID and password, one for UART id, baud rate, TX/RX pins, TCP port and NeoPixel pin. A UDP broadcast lets the desktop script find the device without knowing its address. The server takes one client at a time, and the note about the onboard UART-USB chip is blunt: it will not work, the direct serial link will.
From the README
From the README
- Feature
- transparent bridge between a hardware Serial (UART) port on an ESP32 and a TCP socket
- Dependency
- Virtual Serial Port Driver
- Limit
- The ESP32 server handles one client at a time.
Hardware
Boards: ESP32
ESP32-class board. Verify the exact board revision, display, power source and wiring in the upstream build guide.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: sunshinejnjn
Screenshots from the upstream README. Code and firmware were not executed. License notices are included.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
AIDlink Acid Box Acidportal AgentScreen Arduino Tesla Seat Async Esp Fs Webserver
See what an ESP32 project looks like, and whether it runs on your board.
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Try a project
Newest listings
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.