ESP32 Gallery

HOME ASSISTANT E-PAPER DASHBOARD / ESP32 APPLICATION

E-Paper Home Dashboard

Battery-powered e-ink dashboard for Home Assistant — weather, calendar, sensors — built with ESPHome on LOLIN S3 Pro + Waveshare 7.5" e-Paper

E-Paper Home Dashboard
Open project preview ↗
About this project

About this project

Current weather, a four-day forecast, calendar events, any Home Assistant sensor and a battery footer share a 7.5-inch monochrome panel that wakes for a short cycle every 20 minutes, draws once and sleeps again on a LOLIN S3 Pro - roughly a month from a 2500 mAh cell. The configuration is ESPHome YAML: entity IDs sit in one substitutions block, a template sensor file in Home Assistant reshapes the forecast, and fonts are copied into the config folder before flashing. Weather is the only mandatory source; calendars, fuel price, EV range and task counters are optional. The 800x480 display is rotated to portrait and split into five fixed zones, the on-screen text is Polish, and a Gerber PCB is included but optional - without it there is no reverse polarity protection.

From the README

From the README

Power
lasting about a month+ on a 2500 mAh battery
Display
The display is 800×480 px, rotated 90° (portrait orientation: 480 wide × 800 tall).
Language
The on-screen UI language is Polish.
Limit
Without the PCB there is no reverse polarity protection
Build
Via CLI: esphome run dashboard.yaml

Hardware

Native board: LOLIN S3 Pro

Boards: Waveshare

Waveshare. Verify the exact board revision, wiring and power requirements in the upstream build guide.

Media credit & rights

Upstream project media · rights remain with its owner · Credit: pavlojs

Screenshots from the upstream README. Code and firmware were not executed. License notices are included.

View original source ↗ Copyright & removal · Reviewed

More projects on these boards

Waveshare Weather Calendar jarvis Clawdometer Waveshare AMOLED Watch reflbo

Same use case

AI Monitor P4 S3

Source repository ↗

Browse all projects

See what an ESP32 project looks like, and whether it runs on your board.

Sort

FILTERS

Browse by form factor. Check the exact board, chip and peripherals before installing.

MADE SOMETHING?

Give your project a little spotlight.

Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.

Try it

Project source ↗
Build & safety

Open project page ↗
FROM YOUR WORKBENCH

Small board.
Big idea.

Share what you've made.

Automatic checks start now. Most reviews finish in 1–3 days.

Prefer GitHub? Open an issue ↗