RTC CLOCK / ESP32 APPLICATION
ESP32 RTC Clock
Datum, Uhrzeit, Temperatur, Farbdisplay
About this project
About this project
Three parts, no network: a plain ESP32, a 1.77-inch colour TFT and a DS3231 real-time clock module on the I²C bus. The screen carries weekday, date, time and temperature, and because the DS3231 keeps time by itself the clock never needs Wi-Fi. The display hangs off SPI with SCK on GPIO 18, MOSI on GPIO 23, reset on GPIO 14, data/command on GPIO 13 and chip select on GPIO 12, while the backlight LEDA goes to 3,3 V and the RTC and panel take 5 V and ground. Before first use the RTC is meant to be set to the current time with a separate setting program, so it starts from a known value rather than whatever it held.
From the README
From the README
- Wiring
- TFT-Display SCK-> ESP32 18
- Feature
- Wochentag, das Datum, die Uhrzeit und die Temperatur
- Limit
- Mit Verwendung des RTC-Moduls ist kein WLAN notwendig.
Hardware
Boards: ESP32
Supported hardware: ESP32. Confirm the exact board revision and pin map in the upstream repository.
What the source supports
Upstream evidence: Reviewed from public README media at commit e22dc90bf6a5 under MIT. Firmware was not executed.
Media credit & rights
Upstream project media · rights remain with its owner · Credit: frankyhub
Screenshots decoded from the upstream README at a pinned commit. Repository code and firmware were not executed; the license texts are included in the preview package.
View original source ↗ Copyright & removal · Reviewed
More projects on these boards
AIDlink Acid Box Acidportal AgentScreen Arduino Tesla Seat Async Esp Fs Webserver
See what an ESP32 project looks like, and whether it runs on your board.
FILTERS
Browse by form factor. Check the exact board, chip and peripherals before installing.
Try a project
Newest listings
Give your project a little spotlight.
Repository links do not imply author endorsement or verified hardware compatibility. Check the upstream safety guidance before powering or flashing a build.